Corten A plate is weather resistant steel which is better suited for heavy and load bearing structures.Corten A is produced from billet castings from blast furnace and hot rolled in a continuous mill for smaller thicknesses and on a four high mill for others. The purity of the steel of fine grade austenitic quality and the addition of special alloys, and provide this steel plates, excellent mechanical characteristics, even at high temperatures and self-passivating properties when exposed tocorrosive agents present in urban atmosphere. This property allows this steel to face down corrosion for longer periods when compared to common steel, even if not painted.
Corten A Hot Forming: Normally it is carried out in a temperature range of 800 °C to 1050 °C. If it is required in different temperature, it is advisable to carry out a normalizing treatment at the end.
Flame Cutting: Normally it is carried out with the usual methods. In general, no preheat is required, but working on plates with a temperature of less than 10 °C shall be avoided.
Flame Cutting: Normally it is carried out with the usual methods. In general, no preheat is required, but working on plates with a temperature of less than 10 °C shall be avoided.
Corten A Welding: Corten A plate can be easily welded using common procedures used for mild steel plate (spot, TIG, MIG, MAG, electrode etc.). It is however advisable to avoid tempering in the heated zone and therefore to limit the ratio of linear energy to the thickness. Considering the chemical composition, it can be stated that Corten A steel is not subject to cold cracking. Welded structures fabricated with corten a steel does not normally need thermal stress relief treatment.
Refercence Standards: Corten A steel plate to be following standards: NFA35-502-E36W, ASTMA242 and A588, EN10155-Fe510A1K1/DD2K1, S.E.W087.
【Whatsapp:+8615538304508】
没有评论:
发表评论